RIKA SAFR007 FIRE-X 600ml White Intumescent Sealant Foil Pack

RIKA FIRE-X fire rated intumescent and acoustic acrylic sealant is a halogen free, polymer emulsion-based sealant that swells when subjected to temperatures in excess of 125°C and forms a char coat that restricts the passage of smoke and fire. Ideal for sealing door casings, service penetrations, partitioning, fire protection boards, cladding and low movement construction joints where a fire rating is required. Can be used to seal joints up to 35mm wide (a depth pf 8mm is recommended). It is easily applied and dries to a flexible and smooth surfaced material which is readily over paintable. It has excellent adhesion to a wide range of substrates and will not harden or crack with age. And provides acoustic and sound dampening properties. Supplied as a 600ml foil pack. RIKA FIRE-X intumescent & acoustic acrylic sealant has been independently tested to the following assessments: BS EN 1366-3: 2004 & BS EN 1366-4: 2006 Tested at Bodycote Warrington Fire, report No. 173658A achieving 4-hour integrity and insulation rating for a range of linear and penetration seals. BRE Global Assessment Report. CC 201709 14th Jan 2020 An indicative fire test based on BS476 Part 20 & 22 at Warrington Fire Research and achieved a 4-hour fire rating (integrity) for a range of vertical and horizontal joints up to 35mm wide between various non-combustible construction materials. A 1-hour fire rating (integrity) was achieved for a range of vertical joints up to 25mm wide between combustible materials (timber). BS EN ISO 10140-2: 2010 Measurement of Airborne Sound Insulation of Building elements. University of Salford reports 2612 – 76, 77, 79 - 81. The sealant maintained the integrity of a plasterboard partition wall with a Sound Reduction Index of 55dB VOC test report classification – M1 and Indoor Air Comfort GOLD® Features and Benefits: Swells and forms a char coat to restrict the passage of smoke at temperatures greater than 125°C. Excellent adhesion to a wide range of substrates. Permanently flexible and can be painted, when cured. Technical Specification: Pack Size: 600ml Movement Accomodation: ± 7.5% Conforms to ISO 11600 7.5PSkinning Time: 15 mins to 1 hour depending on conditionsCure Time: 5 to 15 days for 15mm X 20mm beadHardness Shore A: 25 – 30 Specific Gravity: 1.60 – 1.68 Temperature Resistance: -20°C to +60°C (intermittent) Application Temperature:+5°C to 4°COver Painting: With most paints. (test to be certain) 1 x 600ml White Intumescent Sealant Foil Pack