Bosch HSS Twist Drill Bit PointTeq 19pcs ProBox 2608577351

Fast Drilling in Metal

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees.

Cylindrical shank compatible with three-jaw drill chucks.

Set Contains

• 1 x 1mm diameter x 12mm working length bit

• 1 x 1.5mm diameter x 18mm working length bit

• 1 x 2mm diameter x 24mm working length bit

• 1 x 2.5mm diameter x 30mm working length bit

• 1 x 3mm diameter x 33mm working length bit

• 1 x 3.5mm diameter x 39mm working length bit

• 1 x 4mm diameter x 43mm working length bit

• 1 x 4.5mm diameter x 47mm working length bit

• 1 x 5mm diameter x 52mm working length bit

• 1 x 5.5mm diameter x 57mm working length bit

• 1 x 6mm diameter x 57mm working length bit

• 1 x 6.5mm diameter x 63mm working length bit

• 1 x 7mm diameter x 69mm working length bit

• 1 x 7.5mm diameter x 69mm working length bit

• 1 x 8mm diameter x 75mm working length bit

• 1 x 8.5mm diameter x 75mm working length bit

• 1 x 9mm diameter x 81mm working length bit

• 1 x 9.5mm diameter x 81mm working length bit

• 1 x 10mm diameter x 87mm working length bit